Trang tin
1. Experimental Studies to Verify the Effect of Chip Shrinkage Coefficient on Cutting Forces and Surface Roughness in High Speed Milling of A6061 Aluminum Alloy 
Pham Thi Hoa1,2, Mac Thi Bich1,2, Banh Tien Long1, Nguyen Duc Toan1*
1 Hanoi University of Science and Technology
2 Department of Mechanical Engineering

2. Dynamics and control of a four-bar mechanism with relative longitudinal vibration of the coupler link 
Nguyen Van Khang1, Nguyen Sy Nam2*
1 Hanoi University of Science and Technology
2 National University of Civil Engineering 

3. Development of Plasma-Mig Hybrid Welding Process for Butt Joint Welding of Thick Plate Steel
Lam Tran1*, Van Anh Nguyen2, Shinichi Tashiro2, Manabu Tanaka2, Thuc Ha Nguyen1
1 Hanoi University of Science and Technology 
2 Osaka University

4. The Influence of Electrical Parameters on the Penetration of Tungsten into the SKD61 Workpiece Surface in PMEDM using Tungsten Carbide Powder
Le Van Tao1,2*,  BanhTien Long1, Tran Xuan Thai 1, Nguyen Thi Hong Minh 1
1 Hanoi University of Science and Technology
2 Military Technical Academy

5. Modeling and Force Analysis of an Electrothermal Micro Gripper with Amplification Compliant Mechanism 
Dang Bao Lam1*, Nguyen Tuan Khoa1,2, Nguyen Dang Thuan3, Pham Hong Phuc1
1 Hanoi University of Science and Technology
2 Queensland Micro - and Nanotechnology Centre, Griffith University, Australia
3 Smart System Laboratory, Hanbat National University, Korea

6. Application of Sinusoidal Phase Modulation Technique for Infrared Spectrum Measurement by Fourier Transform Method
Doan Giang1,2, Nguyen Van Vinh1, Nguyen Thi Phuong Mai1, Vu Thanh Tung1*
1 Hanoi University of Science and Technology
2 Military Institute of Environmental Chemistry

7. A Method for Capturing Accuracy and Pose Repeatability of Articulated Industrial Robots
Duong Minh Tuan*, Le Duc Do - Hanoi University of Science and Technology

8. Optimal Parameters of Linear Dynamic Vibration Absorber for Reduction of Torsional Vibration
Vu Xuan Truong1, 2, Khong Doan Dien2, Nguyen Duy Chinh2, Nguyen Duc Toan 3,*
1 Graduate University of Science and Technology, VAST
2 Hungyen University of Technology and Education
3 Hanoi University of Science and Technology

9. Effect of quenching media on distortion of C-Ring specimen made by 100Cr6 steel - Simulation and Experiment
 Tran Thi Xuan1*, Nguyen Van Tu1, Le Thi Chieu2, Vu Dinh Toai1
1 Hanoi University of Sciense and Technology
2 Vietnam Casting – Metallurgy Society

10. Dynamic Analysis of Complex Composite Tubes by Continuous Element Method
Le Thi Bich Nam1, *, Nguyen Manh Cuong1, Tran Ich Thinh1, 
Duong Pham Tuong Minh2, Le Quang Vinh3 
1 Hanoi University of Science and Technology
2 Thai Nguyen University of Technology
3 Viet tri University of Industry

11. Fatigue Life Prediction under Multiaxial Variable Amplitude Loading Using a Stress Invariant Based Criterion 
Vu Quoc Huy*, Vu Dinh Quy, Le Thi Tuyet Nhung - Hanoi University of Science and Technology

12. Performance Evaluation of a 2D Front Tracking Method – a Direct Numerical Simulation Method for Multiphase Flows
Vu Van Truong - Hanoi University of Science and Technology

13. Crystallization Kinetics of Mechanically Alloyed Al80Fe20 Amorphous Powder 
Nguyen Thi Hoang Oanh, Tran Quoc Lap, Pham Ngoc Dieu Quynh, 
Le Hong Thang, Nguyen Thi Anh Nguyet, Pham Ngoc Huyen, Nguyen Hoang Viet*
- Hanoi University of Science and Technology

14. Influence of Sintering Additives on the Porous Structure and Mechanical Properties of Porous Alumina
Le Minh Hai*, Nguyen Minh Duc, Dang Quoc Khanh - Hanoi University of Science and Technology