In active magnetic bearing systems, the magnetic force is proportional to the square of the current and inversely proportional to the square of the distance gap between the stator and rotor. In order to design the control algorithm, we must linearized this relationship. Control algorithms ensure good quality, exactly as designed only at the point of operation. This paper proposes a solution designed to help implement the controller without linearization. The proposed algorithm is combined of backstepping and sliding mode control. In addition, an observer is integrated to estimate load variation. The obtained result was verified with simulation Matlab/Simulink. Simulation results prove the effectiveness of the control structure.
Magnetic bearing, backstepping control, sliding mode control, observer
224-C1, Hanoi University of Science and Technology 1 Dai Co Viet, Hai Ba Trung, Hanoi, Vietnam Tel: +84 (024) 3623.0949 | email: email@example.com
TẠP CHÍ KHOA HỌC VÀ CÔNG NGHỆ Giấy phép số37/GP-BTTTT (15/01/2021) Giấy phép sửa đổi, bổ sung số140/GP-BTTTT (05/3/2021) Đơn vị cấp phép:Bộ Thông tin và Truyền thông Cơ quan chủ quản:Trường Đại học Bách Khoa Hà Nội Phó tổng biên tập phụ trách:GS. Đinh Văn Phong